Manual Cold Roll Laminator




Features and Performance:

LBS series of hand cold laminating machine adopted high quality steel and wear-resistant rubber for roller, combined with a spray metal table and adjust the bracket plate,good appearance  flexible rotation, good cold laminating effects and long  life.

Hand-cold laminating machine without power, the structure is simple and affordable.

pressure regulator

The machine can adjust the left and right ends, respectively mounting pressure equal to the pressure at both ends of the rubber roller. Should separate the upper and lower rollers first,then put cold laminating film on , turn the knob, and to ensure that the upper and lower roller parallel and  collide, then a little pressure. Pressure can’t be too heavy to avoid mounted equipment in longevity bubbles.

attention :

both sides of the regulator knob must be  position the empty way!  The first down knob after the other side of the knob down,must re-adjust  pressure! Turn the knob clockwise to increase the pressure; counterclockwise rotation  to reduced pressure.



Model  LBS650 LBS700 LBS750 LBS1000 LBS1300
Max. Laminating width  650 mm 700 mm 750 mm 1000 mm 1300 mm
Max. Laminating thickness  5 mm  5 mm  5 mm  5 mm 8 mm
Roller 2pcs 2pcs 2pcs 2pcs 2pcs
Diameter of roller  65 mm  65 mm  65 mm 72 mm 80 mm
Operating method Hand power Hand power Hand power Hand power Hand power
Packing dimensions 810×215×360mm 860×215×360mm 910×215×360 mm 1180×215×360 mm 1470×220×390 mm
 Weight 13 kg 14 kg 15 kg 23 kg 45 kg

Notes: we are always improving and innovating in technology and quality. All machines can be designed according to those given parameters and requests from customers. Parameters and instruction in this catalog are only for reference.