Out of stock

Hotmelt Powder Coating Machine

Hotmelt Powder Coating Machine

3/4 Screen Printing + Powder Coating + IR Drying TX-5080ST High Precision Flat Vertical Screen Printing Machine

Add to quote


3/4 Screen Printing + Powder Coating + IR Drying



Silk Screen Printing Machine

Semi auto screen printing machine

★Scope of Application

It is suitable for flat printing of glass, CD, nameplate, stickers, credit cards, ceramic flower paper, wooden toy puzzles and electronics industry PCB, SMT solder paste, membrane switch and other products. It is also suitable for flat printing of products with high precision of overprinting, such as gold and silver cardboard, metal sheet, PVC, etc.


★Main Parameters

Model TX-5080ST Printing thickness ≤30mm
Max printing area 500*800CM Air pressure 4.0~6.0 kfg/c㎡
Size of printing table 600*900CM Rated voltage/Power 380V/50HZ /3.2KW
Max size of screen frame 800*1200CM Size of package carton 1460*1150*1650CM
Max printing speed 1000(PCS/H) Gross weight 522(KG)


 ★Main Performance

①vertical structure with the electronic driven printing plate goes up and down vertically, and the electronic driven print head moves left/right.
② Single chip controlled circuit, printing and plate goes up and down using independent driving source.
③ Pneumatic controller controls the printing knife moves up and down, photocell eye controls the stroke, which is independent to tune.
④ Set manual/semi-automatic /automatic three modes , the break time of printing is digital controlled.
⑤ Independent designed head rising and down setting, makes it convenient to clean the scraping blade/reclaiming blade、screen plate during loading and unloading.
⑥ Double guide column master the clamps arm, and install the adjusting device to adjust the distance between plates at the same time, which is convenient to tune.

★Configuration Instructions

① The machine controlled by MCU.
② Circuits adopt AC contactor chint, RIKO Photoelectric eye switch produced in Taiwan.
③ Adopt Cheng Bang Gear Motor from Taiwan, driven by Variable printing.
④ Printing scraper and reclaiming blade controlled by AirTAC brand pneumatic component.
⑤ Left/right scratchers adopt HIWIN precision liner guide from Taiwan.
⑥ Printing plate adopts pneumatic stainless steel and suction system which is produced by Shanghai State-owned factory.


Hot melt Powder Coating Machine

powder scattering machine

★Scope of Application

Full-automatic Power Coating Machine is a post printing machine which can be used to replace the traditional glitter powder/hot-melt powder technology. It has the features such as easy to operate, no dust pollution, etc. When it is used Full-automatic Press Grain Machine is a post printing machine which can be used to replace the traditional to equip the screen printing machine, the work efficiency can be increased greatly, the utilization ratio of glitter powder will rise and a great variety of glitter powder pictures can produce.
If required, this machine can easily connect with drying machines, UV glazing machines, etc. It adopts the upper and lower suction port design to prevent the occurrence of scratches on the surface of the film, and is the best post-press equipment for the film glitter process.


★Main Parameters


Model TX-SF80D
Suction type Double suction
Max dusting width 800mm
Thickness of paper

max size of screen frame

Max working speed printing speed 1500m/h
Power 3.0KW 380V 50HZ


★Main Performance

①The key parts of the machine such as conveyor belt, frequency converter are imported parts, which are easy to use and flexible adjustment.
②The unique powder spraying system enables the color powder to be evenly attached to the printed matter.
③With the color powder recovery system, the excess color powder is lightly pressed by the drum before being dried to make it evenly balanced.
④Podwer – lightly pressure – recycling – drying, high efficiency and energy saving completely solve the problem of uneven podwering, low efficiency, color powder flying all over the sky.
⑤All transmission parts of the whole machine are stepless adjustment, with high durability, good stability and other characteristics.

IR Drying Tunnel

dring tunnel

★Scope of Application

It is suitable for rapid drying of solvent – based inks and drying of general moisture – containing items. Such as: paper printed matter, chemical products, glass, sheet, PVC, metal nameplate, etc.

★Product Details

7 8 9

★Main Parameters


Model TX-IR1800 Loading section 1000mm(to be determined)
Output section 1000mm(to be determined) IR heating section 2000mm * 4groups
Cooling Section 2000mm * 1groups


★Drawing Description


☆Production material

①Heat curing oven:

Curing oven:80mm insulation board

②Shaft arm and base:1.4mm cold rolled plate

③Inner plate:1.2mm stainless steel plate

☆Heating source:220V 1000W 9 infrared heating tubes or carbon tubes

Single heating length:900mm

Total heating power:9KW

The heating system is divided into one control, one temperature control and one temperature display in each group.

Heating temperature requirement: Room temperature-180 degrees (adjustable)

Relative temperature difference:±2 degrees (to ensure uniform heating temperature)

Temperature control accuracy:±1 degree

Hot air circulation:380V 370W   Insulated centrifugal fan  1 Set

☆Conveyor system:

380V  1100W   Frequency control motor – Teflon mesh belt transmission(Taiwan/CPG)

380V  1500W   Frequency converter  (Taiwan/HOLIP)

Speed range:1-5m/min

Conveyor belt: High temperature resistant Teflon mesh belt, mesh belt width:1000mm    mesh:4*4mm

☆IR Heating system:

①2 sets of control units to control on/off.

③2 sets of thermostats to control and display temperature.

Packing & Delivery

Safety and Fast Transportation
1. Packing: Plywood Case for Each Machine

2. Payment terms: T/T (40% deposit to start the production, 60% paid before delivery)
3. Delivery date:14 business days after received the payment.
4. Delivery means: By sea from Shanghai

 Q: Are you a factory or trading company?

A: We are a professional manufacturing factory specialize in printing equipment with more than 20 years experience, committed to supplying our customer top quality and dedication to the constant improvements of quality, reliability, productivity and the competitiveness of our products and services.

Q: How to get a quotation?
A: Please send us an inquiry directly. We need to get specific details, such as material, size, color, thickness, quantity, etc.

Q: Can you do the production as customized?
A: Yes, we have a professional technique team, we could produce the machine depends on your requirements.

Q: What are your terms of payment?
A: We accept TT/LC/PAYPAL/Western union, every payment term we can discuss.

Q: How long is the warranty time?
A: All Taoxing products carry up to a full year warranty. Supply wearing parts with favorable price and long term after-sales service. We believe in total customer satisfaction, aside from our no-hassle guarantee.

We’re looking forward to the opportunity of being of service of you!